Our eShop is currently on maintenance and therefore only available with limited functionality. Quoting is possible. Purchasing is not possible. The entire functionality will be available again from May 5th 2025, 00:01 CEST. Thanks for your understanding.

Midisart®

Tech Support
Midisart®
 

The Sartorius Midisart® 2000 is an ideal choice for small-scale sterile air | gas filtration applications. The single-layer hydrophobic PTFE membrane is self-dewetting and therefore provides high air flow rates even at very low differential pressures over an extended process time.

Availability: 
See more Products below
*Custom/bulk order quotes are provided within 72 hours of request.
Midisart®
Midisart®

The Sartorius Midisart® 2000 is an ideal choice for small-scale sterile air | gas filtration applications. The single-layer hydrophobic PTFE membrane is self-dewetting and therefore provides high air flow rates even at very low differential pressures over an extended process time.

Item No.:
M_Midisart
Availability:

Overview

Specifications

Choose your product

Products (16)

  • Midisart® 2000 0.2 µm
    Documents
    Midisart® 2000 0.2 µm
    Item no.
    17805--------UQN
    Connector(s)
    Inlet: ¼" Hose Barb | Outlet: ¼" Hose Barb
    Packaging
    Non-sterile, bulk packed (plastic bucket)
    Pack Size
    100
    Item no.
    17805--------UQN
    Connector(s)
    Inlet: ¼" Hose Barb | Outlet: ¼" Hose Barb
    Packaging
    Non-sterile, bulk packed (plastic bucket)
    Pack Size
    100
    Item no.
    17805--------UPQ
    Connector(s)
    Inlet: ¼" Hose Barb | Outlet: ¼" Hose Barb
    Packaging
    Non-sterile, bulk packed
    Pack Size
    500
    Item no.
    17805--------UPN
    Connector(s)
    Inlet: ¼" Hose Barb | Outlet: ¼" Hose Barb
    Packaging
    Non-sterile, bulk packed
    Pack Size
    100
  • Midisart® 2000 0.45 µm
    Documents
    Midisart® 2000 0.45 µm
    Item no.
    17804----------E
    Connector(s)
    Inlet: ¼" Hose Barb | Outlet: ¼" Hose Barb
    Packaging
    Sterile, individually packed
    Pack Size
    12
    Item no.
    17804----------E
    Connector(s)
    Inlet: ¼" Hose Barb | Outlet: ¼" Hose Barb
    Packaging
    Sterile, individually packed
    Pack Size
    12
    Item no.
    17804----------G
    Connector(s)
    Inlet: ¼" Hose Barb | Outlet: ¼" Hose Barb
    Packaging
    Sterile, individually packed
    Pack Size
    25
    Item no.
    17804--------NPE
    Connector(s)
    Inlet: ⅛" NPT | Outlet: ⅛" NPT
    Packaging
    Sterile, individually packed
    Pack Size
    12
  • Midisart® 2000 0.2 µm
    Documents
    Midisart® 2000 0.2 µm
    • 0.2 µm
    • Non-sterile, bulk packed
    Item no.
    17877--------UPN
    Item no.
    17877--------UPN
  • Vacusart 0.45 µm
    Documents
    Vacusart 0.45 µm
    • 0.45 µm
    • Non-sterile, bulk packed
    Item no.
    17804----------M
    Item no.
    17804----------M
Results per page: | |

Product Information

The Midisart® 2000 is a ready-to-use filter for sterilizing gases and venting. Superior flow rates and seamless integration into single-use assemblies provide Midisart® customers with a distinct advantage that directly translates into cost savings. Individual 100% factory integrity testing verifies the quality of every filter prior to use.


Midisart® 2000 is designed for maximum handling ease and safety. The device is lightweight only 20 g – so it will not weigh down or kink the tubing.


With a diameter measuring just 64 mm, Midisart® incorporates a filter area of 20 cm2, which means that it is “packed” with high flow rate performance power.


Midisart® 2000 filters can be integrity tested (Bubble Point Test, 60% IPA | Water, BP min. = 1.1 bar for 0.2 µm and BP min. = 0.9 bar for 0.45 µm). The Midisart® Test Manifold (Order code 1Z-LB-0002) can be used to test 10 filters in parallel which simply leads to a reduction of test time by 90%.

Venting Applications

  • Filling and Tranfer Vessels
  • Fermentation Carboys
  • Cell Culture Chambers
  • CO₂ incubators (6 to 120 liters)
  • Holding and Storage Tanks
  • Autoclave venting
  • Small Bioreactors

Applications

  • Application
    Air/Gas Filtration
  • Application Area
    • Filling and tranfer vessels
    • Fermentation carboys
    • Cell culture chambers
    • CO₂ incubators (6 to 120 liters)
    • Holding and storage tanks
    • Autoclave venting
    • Small bioreactors
  • Industry
    Pharma / Biotech / F&B

Biological Information

  • Bacterial Retention
    Quantitative Retention of 1 × E7 CFU/cm² Brevundimonas Diminuta ATCC® 19146 per ASTM methodology

Compliance Information

  • Bacterial Endotoxins
    < 0.25 EU/mL as determined by the LAL test
  • Biocompatibility (USP Class VI)
    USP <88>
  • Biological Reactivity
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Extractables
    The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".

Dimensions

  • Filter Diameter
    64 mm | 2,5”
  • Filter Size
    20 cm² / 3 in²
  • Filtration Area
    20 cm² / 3 in²

General Specifications

  • Capsule/Cartridge Format
    Midisart®
  • Minimum Required Bubble Point
    For 0.2 µm min. Bubble Point > 1100 mbar | 15.95 psi, for 0.45 µm min. Bubble Point > 900 mbar | 13.05 psi , wetting agent: IPA | Water (60 | 40)

Materials of Construction

  • Filter Material
    Polytetrafluorethylene (PTFE)
  • Housing Material
    Polypropylene (PP)
  • Membrane Material
    Polytetrafluorethylene (PTFE)

Operating Conditions

  • Maximum Differential Pressure
    3 bar (in-out), 2 bar (out-in)
  • Maximum Operating Pressure
    3 bar (in-out), 2 bar (out-in)

Physicochemical Information

  • Gamma Stable
    No
  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.

Product Information

  • Brand
    Midisart®
  • Type
    Air filter

Sterility/Purity

  • Sterilization Method
    Autoclavable
  • Sterilizing Grade
    Yes

Usage Protocols

  • Sterilization Procedures
    Max. Temperature 134 °C, max. Autoclaving 20 Cycles